Gigabyte Z790 S WIFI DDR4 (Rev. 1.1/1.2) ATX Motherboard ( Intel Socket LGA1700 , Support 14th, 13th, and 12th Generation Intel Core, Pentium Gold and Celeron Processors, 4 x DDR4 RAM Slots, Max 128GB RAM Support )

Gigabyte Z790 S WIFI DDR4 (Rev. 1.1/1.2) ATX Motherboard ( Intel Socket LGA1700 , Support 14th, 13th, and 12th Generation Intel Core, Pentium Gold and Celeron Processors, 4 x DDR4 RAM Slots, Max 128GB RAM Support )

• CPU
  • LGA1700 socket: Support for the 14th, 13th, and 12th Generation Intel Core, Pentium Gold and Celeron Processors
    L3 cache varies with CPU
• Chipset
  • Intel Z790 Express Chipset
• Memory
  • Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/ DDR4 5000(O.C.)/ 4933(O.C.)/ 4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/ 4266(O.C.) / 4133(O.C.)/ 4000(O.C.)/ 3866(O.C.)/ 3800(O.C.)/ 3733(O.C.)/ 3666(O.C.)/ 3600(O.C.)/ 3466(O.C.)/ 3400(O.C.)/ 3333(O.C.)/ 3200/ 3000/ 2933/ 2666/ 2400/ 2133 MT/s memory modules
    4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
    Dual channel memory architecture
    Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
    Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
    Support for Extreme Memory Profile (XMP) memory modules
    (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules
• Onboard Graphics
  • Integrated Graphics Processor-Intel HD Graphics support:
    – 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz
  • Support for DisplayPort 1.2 version and HDCP 2.3
  • – 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
  • Support for HDMI 2.1 version and HDCP 2.3.
    ** Support native HDMI 2.1 TMDS compatible ports.
  • (Graphics specifications may vary depending on CPU support.)
• Audio
  • Realtek Audio CODEC
    High Definition Audio
    2/4/5.1/7.1-channel
    Support for S/PDIF Out
  • You can change the functionality of an audio jack using the audio software. To configure
  • 1-channel audio, access the audio software for audio settings.
• LAN
  • Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
• Wireless Communication module
  • Intel Wi-Fi 6E AX211 (PCB rev. 1.1)
    – WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
    – BLUETOOTH 5.3
    – Support for 11ax 160MHz wireless standard
    Realtek Wi-Fi 6E RTL8852CE (PCB rev. 1.2)
    – WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
    – BLUETOOTH 5.3
    – Support for 11ax 160MHz wireless standard
    (Actual data rate may vary depending on environment and equipment.)
• Expansion Slots
  • CPU:- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
  • The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.
  • Chipset:
    – 2 x PCI Express x16 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_1, PCIEX1_2)
• Storage Interface
  • CPU:- 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
    Chipset:- 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2M_SB)
    – 4 x SATA 6Gb/s connectors
    RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices
    RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
• USB
  • Chipset:
    – 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header
    – 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
    – 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
    – 1 x USB 2.0/1.1 port on the back panel
    Chipset+2 USB 2.0 Hubs:
    – 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
• Internal I/O Connectors
  • 1 x 24-pin ATX main power connector
    1 x 8-pin ATX 12V power connector
    1 x CPU fan header
    1 x CPU fan/water cooling pump header
    3 x system fan headers
    1 x system fan/water cooling pump header
    2 x addressable LED strip headers
    2 x RGB LED strip headers
    3 x M.2 Socket 3 connectors
    4 x SATA 6Gb/s connectors
    1 x front panel header
    1 x front panel audio header
    1 x S/PDIF Out header
    1 x USB Type-C header, with USB 3.2 Gen 2 support
    1 x USB 3.2 Gen 1 header
    2 x USB 2.0/1.1 headers
    1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)
    1 x serial port header
    1 x Q-Flash Plus button
    1 x reset button
    1 x reset jumper
    1 x Clear CMOS jumper
• Back Panel Connectors
  • 1 x USB 3.2 Gen 2 Type-A port (red)
    2 x USB 3.2 Gen 1 ports
    5 x USB 2.0/1.1 ports
    2 x SMA antenna connectors (2T2R)
    1 x DisplayPort*
    1 x HDMI port*
    1 x RJ-45 port
    6 x audio jacks
    * Actual support may vary by CPU.
• I/O Controller
  • iTE I/O Controller Chip
• H/W Monitoring
  • Voltage detection
    Temperature detection
    Fan speed detection
    Water cooling flow rate detection
    Fan fail warning
    Fan speed control
  • Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.
• BIOS
  • 1 x 256 Mbit flash
    Use of licensed AMI UEFI BIOS
    PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
• Unique Features
  • Support for GIGABYTE Control Center (GCC)
  • Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
  • Support for Q-Flash
    Support for Q-Flash Plus
    Support for Smart Backup
• Bundle Software
  • Norton Internet Security (OEM version)
    LAN bandwidth management software
• Operating System
  • Support for Windows 11 64-bit
    Support for Windows 10 64-bit
• Form Factor
  • ATX Form Factor; 30.5cm x 24.4cm